Extreme Grapple Bucket

The Extreme Grapple Bucket is ideal for picking up logs, rocks, left over building supplies or any other type of debris. It can handle more material and is intended for larger machines than our Heavy Duty Grapple Bucket.

The Extreme Grapple Bucket boasts a 1 inch thick, 8 inch wide cutting edge. It has an opening of 45 inches and a depth of 39 inches. There are 1/2 inch thick tines on the bottom so you don’t wear out your bucket. The cylinders and cylinder shafts are protected with 1/8 inch diamond plate.

2″ bore by 10″ stroke cylinders that operate independently, rated at 4,000 PSI
5/8″ top tines
Hydraulic lines routed inside the tubing to prevent tears
Grease fittings at every pivot point
Bucket has a 1″ x 8″ cutting edge
Optional weld on teeth
Optional bolt on edge or rezloh on edge
We recommend a 60 HP machine or bigger to operate this piece of equipment